TC35i AT Command Set
11.21 AT^SCMW
s
m
obil
e
TC35i_ATC_V02.07 Page 313 of 439 1/30/04
Confidential / Released
11.21 AT^SCMW Write concatenated SMS messages to memory
Writing a concatenated message to the memory is similar to writing a "normal" message, except that each seg-
ment of the concatenated message must be identified by the additional parameters
<seq>, <ieia> and <ref>.
To store all segments of the message one by one, the
AT^SCMW write command must be executed for each seg-
ment.
Syntax
Command Description
The write commands transmits one segment of a concatenated SMS (either SMS-DELIVER or SMS-SUBMIT)
from TE to memory storage
<mem2>. Memory location <index> of the stored message is returned. Message
status will be set to 'stored unsent' unless otherwise given in parameter
<stat>.
Notes
• Command is only available if AT+CMGF=1.
• To send or delete a concatenated short message please use the known SMS commands, see
AT+CMSS for
sending and
AT+CMGD for deleting.
• See notes provided for
AT+CMGW.
Test Command
AT^SCMW=?
Response(s)
OK
Write Command
If text mode (see AT+CMGF=1)
AT^SCMW=<oa>/<da>, [<tooa>/<toda>][, <stat>] , <seq>, <max>, <ieia>, <ref> <CR> Text can be
entered.
<CTRL-Z>/<ESC>
Response(s)
^SCMW: <index>
OK
If writing fails
ERROR
+CMS ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
SIEMENS
To Next Page
Loading...
Need help?
General
