Siemens TC35i Terminal

TC35i AT Command Set
15.7 AT+VTS
s
m obil e
TC35i_ATC_V02.07 Page 371 of 439 1/30/04
Confidential / Released
15.7 AT+VTS DTMF and tone generation
The Write command is intended to send ASCII characters or strings which cause the Mobile Switching Center
(MSC) to transmit DTMF tones to a remote subscriber. It works during active voice calls only and offers the fol-
lowing variants:
•
AT+VTS=<dtmfString> allows to send a sequence of DTMF tones with a duration defined with AT+VTD.
•
AT+VTS=<dtmf>[,<duration>] allows to send a single DTMF tone. In this case, the duration can be ind-
vidually determined during the call.
Syntax
Parameter Description
String of ASCII characters in the set 0-9,#,*,A, B, C, D. Maximal length of the string is 29. The string must be
enclosed in quotation marks ("...").
ASCII character in the set 0...9,#,*, A, B, C, D.
Test Command
AT+VTS=?
Response(s)
+VTS: (list of supported<dtmf>s), (list of supported<duration>s)
OK
Write Command
AT+VTS=<dtmfString>
Response(s)
OK
Write Command
AT+VTS=<dtmf>[, <duration>]
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
GSM 07.07
<dtmfString>
(str)
<dtmf>
(str)