TC35i AT Command Set
15.8 AT^SAIC
s
m
obil
e
TC35i_ATC_V02.07 Page 373 of 439 1/30/04
Confidential / Released
15.8 AT^SAIC Audio Interface Configuration
Syntax
Command Description
This command configures the interface connections of the active audio mode.
Parameter Description
Input and output selection
1 Not supported
2 Analog input and output
Test Command
AT^SAIC=?
Response(s)
^SAIC:(list of supported <io>s), (list of supported<mic>s), (list of supported<ep>s)
OK
Read Command
AT^SAIC?
Response(s)
^SAIC: <io>, <mic>, <ep>
OK
Write Command
AT^SAIC=<io>[, <mic>[, <ep>]]
Response(s)
OK
ERROR
+CME ERROR: operation not allowed
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
<io>
(num)(^SNFW)
To Next Page
Loading...
