Siemens TC35i Terminal

TC35i AT Command Set
11.12 AT+CPMS
s
m obil e
TC35i_ATC_V02.07 Page 297 of 439 1/30/04
Confidential / Released
11.12 AT+CPMS Preferred SMS message storage
Syntax
Command Description
Thewrite command selects memory storages <mem1>,<mem2>, <mem3> to be used for reading, writing, etc.
Parameter Description
Number of messages currently in <mem1>
Test Command
AT+CPMS=?
Response(s)
+CPMS: (list of supported <mem1>s), (list of supported <mem2>s), (list of supported <mem3>s)
OK
Read Command
AT+CPMS?
Response(s)
+CPMS: <mem1>, <used1>, <total1>, <mem2>, <used2>, <total2>, <mem3>, <used3>, <total3>
OK
ERROR
ERROR
+CMS ERROR
Write Command
AT+CPMS=<mem1>[, <mem2>[, <mem3>]]
Response(s)
+CPMS: <used1>, <total1>, <used2>, <total2>, <used3>, <total3>
OK
ERROR
ERROR
+CMS ERROR
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.05
<used1>
(num)