TC35i AT Command Set
11.28 AT^SSMSS
s
m
obil
e
TC35i_ATC_V02.07 Page 325 of 439 1/30/04
Confidential / Released
11.28 AT^SSMSS Set Short Message Storage Sequence
Syntax
Command Description
The short message storage ''MT'' (see AT+CPMS) is a logical storage. It consists of two physical storages ''ME''
and ''SM''. This command allows to select the sequence of addressing this storage.
Parameter Description
MT sequence
0
(&F)
''MT'' storage is ''ME'' then ''SM
1 ''MT'' storage is ''SM'' then ''ME''
Note
• Access to the SIM storage is faster. For compatibility with previous software re-leases, the ''MT'' sequence
<seq>=0 is the factory default.
Test Command
AT^SSMSS=?
Response(s)
^SSMSS: (list of supported) <seq>s
Read Command
AT^SSMSS?
Response(s)
^SSMSS: <seq>
OK
Write Command
AT^SSMSS=<seq>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
<seq>
(num)
To Next Page
Loading...
