Siemens TC35i Terminal

TC35i AT Command Set
18.4 AT Command Settings storable with AT&W
s
m obil e
TC35i_ATC_V02.07 Page 426 of 439 1/30/04
Confidential / Released
18.4 AT Command Settings storable with AT&W
Table 18.4: Settings Stored to User Profile on ASC0 / MUX Channel 1
AT Command Stored parameters
Configuration Commands
ATQ <n>
ATV <value>
ATX <value>
AT\V <value>
AT+CMEE <n>
Status Control Commands
AT+CMER <mode>, <ind>
ATS18 <n>
Serial Interface Control Commands
AT\Q <n>
AT&C <value>
AT&D <value>
AT%D <mode>, <dialType>
AT&S <value>
ATE <value>
AT+ICF <format>, <parity>
AT+IFC <TEflowcontrol>, <TAflowcontrol>
AT+ILRR <value>
AT^STPB <n>
Call related Commands
ATS0 <n>
ATS6 <n>
ATS7 <n>
ATS8 <n>
ATS10 <n>
AT+CBST <speed>, <name>, <ce>
AT+CRLP <iws>, <mws>, <T1>, <N2>
AT+CR <mode>
AT+CRC <mode>
Network Service Commands