Siemens TC35i Terminal User Manual

TC35i AT Command Set
8. Network Service Commands
s
m obil e
TC35i_ATC_V02.07 Page 184 of 439 1/30/04
Confidential / Released
8. Network Service Commands
The AT Commands described in this chapter are related to various network services. More Commands related
to this area can be found at the chapter "Supplementary Service Commands".
8.1 AT+COPN Read operator names
Syntax
Command Description
TA returns the list of operator names from the ME. Each operator code <numericn> that has an alphanumeric
equivalent
<alphan> in the ME memory is returned. See also: AT^SPLM.
Parameter Description
Operator in numeric form; GSM location area identification number.
Operator in long alphanumeric format; can contain up to 16 characters.
Test Command
AT+COPN=?
Response(s)
OK
Exec Command
AT+COPN
Response(s)
+COPN: <numericn>, <alphan>
+COPN: ...
OK
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.07
<numericn>
(str)
<alphan>
(str)

Siemens TC35i Terminal Specifications

General

Brand	Siemens
Model	TC35i Terminal
Category	Modem
Language	English