TC35i AT Command Set
10.22 AT+FRH
s
m
obil
e
TC35i_ATC_V02.07 Page 267 of 439 1/30/04
Confidential / Released
10.22 AT+FRH Receive Data Using HDLC Framing
Syntax
Command Description
This command causes the TA to receive frames using the HDLC protocol and the modulation defined below. An
ERROR response code results if this command is issued while the modem is on-hook.
Note
• Used for Fax Class 1 only
Write Command
AT+FRH=<mod>
Response(s)
CONNECT
If error related to ME functionality
ERROR
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
TIA/EIA-578
To Next Page
Loading...
