TC35i AT Command Set
15.14 AT^SNFPT
s
m
obil
e
TC35i_ATC_V02.07 Page 384 of 439 1/30/04
Confidential / Released
15.14 AT^SNFPT Set progress tones
Syntax
Command Description
The write command controls the Call Progress Tones generated at the beginning of a mobile originated call
setup.
Parameter Description
0 Disables Call Progress Tones
1
(P)
Enables Call Progress Tones (audible tones shortly heard on the phone when
ME starts to set up a call.)
Note
• Please note that the setting is stored volatile, i.e. after restart or reset, the default value 1 will be restored.
Test Command
AT^SNFPT=?
Response(s)
^SNFPT: (list of supported <pt>s)
OK
Read Command
AT^SNFPT?
Response(s)
^SNFPT: <pt>
OK
Write Command
AT^SNFPT=<pt>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS
<pt>
(num)
To Next Page
Loading...
