Siemens TC35i Terminal

TC35i AT Command Set
3.3 AT^SIND
s
m obil e
TC35i_ATC_V02.07 Page 68 of 439 1/30/04
Confidential / Released
3.3 AT^SIND Extended Indicator Control
AT^SIND supplies extended event indicator control and
• offers greater flexibility than standard
AT+CIND,
• offers several extra indicators,
• can show the current status of all indicators supported by
AT+CIND and AT^SIND,
• gives the possibility to register or deregister the indicators of both commands,
• displays all indicator event reports via "
+CIEV" URCs.
Presentation mode of the generated URCs is controlled via
AT+CMER.
Syntax
Test Command
AT^SIND=?
Response(s)
^SIND: (<indDescr>, list of supported <indValue>s)[, (<indDescr>, list of supported <indValue>s)[,
...]], (list of supported
<Mode>s)
OK
Read Command
AT^SIND?
Response(s)
^SIND: <indDescr>, <Mode>, <indValue>
OK
ERROR
+CME ERROR: <err>
Write Command
AT^SIND=<indDescr>, <Mode>
Response(s)
OK
ERROR
+CME ERROR: <err>
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS