Siemens TC35i Terminal

TC35i AT Command Set
15.18 AT^SRTC
s
m obil e
TC35i_ATC_V02.07 Page 392 of 439 1/30/04
Confidential / Released
15.18 AT^SRTC Ring tone configuration
Syntax
Command Description
The test command returns the current ring tone and volume
The read command returns the current
<type> and current <volume>. The read command can be used while
test playback is off or on. In the latter case, see Execute command for details.
Test Command
AT^SRTC=?
Response(s)
^SRTC:(list of supported) <type>s, (list of supported) <volume>s, (list of supported) <event>s
OK
Read Command
AT^SRTC?
Response(s)
^SRTC: <type> (of <event>=0) , <volume> (of <event>=0) , <type>(of <event>=1) , <volume>(of
<event>=1), <status>
OK
Exec Command
AT^SRTC
Response(s)
OK
Write Command
AT^SRTC=[<type>] [, <volume>] [, <event>]
Response(s)
^SRTC: <type>, <volume>
OK
ERROR
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
SIEMENS