TC35i AT Command Set
16. Hardware related Commands
s
m
obil
e
TC35i_ATC_V02.07 Page 395 of 439 1/30/04
Confidential / Released
16. Hardware related Commands
The AT Commands described in this chapter are related to the TC35i's hardware interface. More information
regarding this interface is available with the "TC35i Hardware Interface Description"[2].
16.1 AT+CALA Set alarm time
Syntax
Test Command
AT+CALA=?
Response(s)
+CALA: (list of supported<n>s), (list of supported<type>s), (list of supported<tlength>s)
OK
ERROR
+CME ERROR: <err>
Read Command
AT+CALA?
Response(s)
+CALA: <time>[, <n>[, <type>[, <text>]]]
OK
ERROR
+CME ERROR: <err>
Write Command
AT+CALA=<time>[, <n>[, <type>[, <text>]]]
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 MUX1 MUX2 MUX3
! % % % %
Reference(s)
GSM 07.07
To Next Page
Loading...
