Siemens TC35i Terminal

TC35i AT Command Set
9.4 AT+CAOC
s
m obil e
TC35i_ATC_V02.07 Page 218 of 439 1/30/04
Confidential / Released
9.4 AT+CAOC Advice of Charge information
Syntax
Command Description
Execute command returns the current call meter value.
Test Command
AT+CAOC=?
Response(s)
+CAOC: (list of supported<mode>s)
OK
Read Command
AT+CAOC?
Response(s)
+CAOC: <mode>
OK
Exec Command
AT+CAOC
Response(s)
ERROR
+CME ERROR: <err>
If <mode>=0, TA returns the current call meter value:
+CAOC: <ccm>
OK
Write Command
AT+CAOC=[<mode>]
Response(s)
ERROR
+CME ERROR: <err>
If <mode>=0, TA returns the current call meter value.
OK
PIN ASC0 MUX1 MUX2 MUX3
% % % % %
Reference(s)
GSM 07.07