TC35i AT Command Set
10.4 AT+FBOR
s
m
obil
e
TC35i_ATC_V02.07 Page 248 of 439 1/30/04
Confidential / Released
10.4 AT+FBOR Query data bit order
Syntax
Command Description
Query the bit order for receive-mode. The mode is set by the ME depending on the selected Service Class, see
"
AT+FCLASS Fax: Select, read or test service class".
Parameter Description
bit order modes
0 Direct bit order for both Phase C and for Phase B/D data.
[1] Reversed bit order for Phase C data, direct Bit Order for Phase B/D data.
Note
• Used for Fax Class 2 only
Test Command
AT+FBOR=?
Response(s)
(list of supported <bor>s)
OK
Read Command
AT+FBOR?
Response(s)
<bor>
OK
Write Command
AT+FBOR=<bor>
Response(s)
OK
PIN ASC0 MUX1 MUX2 MUX3
! % % ! !
Reference(s)
EIA PN-2388
<bor>
(num)
To Next Page
Loading...
