TC35i AT Command Set
9.10 AT+CLIR
s
m
obil
e
TC35i_ATC_V02.07 Page 236 of 439 1/30/04
Confidential / Released
Parameter shows the subscriber CLIR service status in the network:
0 CLIR not provisioned
1 CLIR provisioned in permanent mode
2 Unknown (e.g. no network, etc.)
3 CLIR temporary mode presentation restricted
4 CLIR temporary mode presentation allowed
Note
• The settings made with AT+CLIR=1 or AT+CLIR=2 are used for all outgoing calls until the ME is switched off
or
AT+CLIR=0 is used.
<m>
(num)
To Next Page
Loading...
Need help?
General
