TC35i AT Command Set
15.11 AT^SNFI
s
m
obil
e
TC35i_ATC_V02.07 Page 379 of 439 1/30/04
Confidential / Released
Notes
• Write command works only in audio modes 2 to 6!
• Read and write options of this command refer to the active audio mode.
• The range of
<inCalibrate> is up to 65535 but will be suppressed to 32767. Values above <inCali-
brate>
= 65535 will cause a failure.
• Changed values have to be stored with
AT^SNFW.
• Attention! When you adjust audio parameters avoid exceeding the maximum allowed level. Bear in mind that
exposure to excessive levels of noise can cause physical damage to users!
• The default values are customer specific.
To Next Page
Loading...
Need help?
General
