TC35i AT Command Set
4.4 AT%D
s
m
obil
e
TC35i_ATC_V02.07 Page 91 of 439 1/30/04
Confidential / Released
• Command settings are storable via AT&W.
• Exec command is not supported during multiplex mode (
AT+CMUX).
Example
Setup the first entry in the ME phone book and enable automatic dial on DTR line activation.
For details regarding phone book handling refer to
AT+CPBS and AT+CPBW.
If a DTR line activation has occured:
AT+CPBS="ME"
Select ME phone book
OK
AT+CPBW=1,"+498972255000",145,"Customer Sup-
port"
Store number of Siemens AG Wireless Modules
Customer Support Hotline to tell that everything
works as expected.
OK
AT%D1;
Enable automatic dial.
OK
AT&W
Store setting in the user profile.
OK
OK
ATD command entry confirmation.
NO CARRIER
Called party hang up.
To Next Page
Loading...
