TXP CLC Course
12
Type in the desired AP number (APF is always 0), select complete generation
then click on OK. Afterwards, if there are errors locate the protocol file SW_GEN
in the same manner as above for the hardware errors.
After successful completion of the hardware and software compilers (error free
code) the LAN needs to be generated. From the main ES 680 menu click on
generators then LAN as below:
The following menu will appear:
Click on OK. A window will appear briefly and then dissappear when the compiler
is finished. To view the protocol file LAN_GEN use the Edit, View/Print function
as above.
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
7
To Next Page
Loading...
