TXP CLC Course
IM 308-C
If a new Memory card needs to be programmed proceed as follows:
From the main ES 680 menu select Generators, then AP, then Create ET200
Memory Card for Field devices as shown below:
The following menu will appear:
Type in the desired AP number then click on OK. The following window should
appear if the generation of data was successful:
Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
8
To Next Page
Loading...
