What causes a 'Com. failure with ACXX' error on a Simrad AP25, and how to fix it?
If your Simrad Autopilot System displays 'Com. failure with ACXX', it indicates a faulty Autopilot Computer or poor Robnet2 cable connections. You can resolve this by checking the Robnet2 connectors and cable, or replacing the Autopilot Computer PCB.
What does 'Memory failure ACXX' mean on Simrad AP25 and how to fix it?
If your Simrad Autopilot System displays 'Memory failure ACXX', it means there is a wrong checksum on memory parameters or variables and the Autopilot Computer will use default values. To solve this perform a "Master reset" by switching the system off and on again. If the alarm repeats, replace the Autopilot Computer PCB.
What causes 'Failure active Control Unit' on Simrad Autopilot System and how can I fix it?
If your Simrad Autopilot System displays 'Failure active Control Unit', it means that the active control unit has gone silent. To resolve this, press the STBY button on an "Inactive" unit to reset it. Also, check or repair the Robnet2 cable, or replace the control unit PCB if necessary.
General| Brand | Simrad |
|---|---|
| Model | AP25 |
| Category | Autopilot System |
| Language | English |
To Next Page
