Simrad AP25 Instruction Manual

Installation
20222139A 53
Cable strain relief
Once all the cables have been run to the appropriate peripherals
and connected to the autopilot computer unit they should be
secured to ensure that they are not snagged or exposed to excess
strain.
Screw the strain relief tab to the cable exit port on the autopilot
computer unit using the screws supplied and secure the cables to
the tab using the wraps as shown.
Figure 3-3 Cable strain relief

Simrad AP25 Specifications

General

Brand	Simrad
Model	AP25
Category	Autopilot System
Language	English