Name: Simrad AP25
Brand: Simrad
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Simrad AP25 Autopilot

40 20222139A

Compass

Select the compass to be used if more than one

compass is connected.

Note! Compass can only be selected in STBY mode

Navigation

Select a source for NAV mode steering.

Position

Select the source for position data.

Wind Angle

Select the source for Wind Angle.

Wind Calculated

Select the source for Calculated Wind data for the

Simrad group. The autopilot uses internal source

irrespective of the selected source.

Water Speed

Select the source for water speed (normally the same

as the source providing Log data).

Water temperature

Select the source for water temperature (normally the

same as the source providing depth data).

DisLog

Select the Log source.

Depth

Select the source for depth data.

Depth source information

Press the STBY button to leave the User setup.

Set shallow water

Use the course knob to set the shallow water alarm

limit.

Range: 0-100,0 m (0-328 ft.)

The setting of the alarm is local. In a multistation

system, however, the setting representing the

shallowest water limit will activate the alarm even if

this setting is on an “inactive” unit.

Simrad AP25 Instruction Manual

Other manuals for Simrad AP25