Operation
20222147A 29
Lazy S-turn
The autopilot also provides a lazy S-turn feature when in AUTO
mode.
The user decides whether the initial turn should be made to Port
or to Starboard.
Ensure that the lazy S-turn pattern has been selected under the
User Set-up menu. Refer to Turn Pattern select on page 45.
To enter Lazy S-turn mode:
Press of the TURN/DODGE/INFO button repeatedly until
LAZY S is flashing in the display.
Boat turning to port
The course change can be adjusted before the turn
is initiated.
The autopilot will continue on the set course until
you press either the PORT or STBD button to
select the direction in which to make the first course
change. If you do not press PORT or STBD within
1 minute, the autopilot will return to AUTO mode
and stay on course.
While in a Lazy-S pattern you can alter the course
change magnitude, the frequency or rate of change
(1-9) and the main course. An arrow shows the
direction of the turn.
Course change
Low rate
High rate
Main course
Main course
To exit Lazy S-turn mode, press any of the mode buttons. When
pressing the AUTO button, the new set course is shown in the
upper portion of the display.
To Next Page
Loading...
Need help?
General
