Operation
20222147A 39
Example: With the speed of 20 knots you should use a waypoint
circle with radius 0.09 nm.
Note ! The distance between any waypoints in a route must not be
smaller than the radius of the waypoint arrival circle when using
automatic waypoint shift.
2.15 Dodge in NAV
When dodging in NAV mode, the course displayed as Course To
Steer (CTS) is the boat’s recommended heading. However, the
previous set course is stored by the autopilot. When DODGE is
flashing on the display, the autopilot is no longer in control of
the steering and you must either steer the boat manually or take
control using either Non-Follow-up steering or Follow-up
steering. The autopilot will remain in the DODGE mode until
you exit DODGE by a second press on the
TURN/DODGE/INFO button or until you select another mode.
Perform dodging the same way as in AUTO mode above.
Quick double press to
activate Dodge mode
To return from Dodge mode, press one of the following:
1.
Returns to NAV mode at present position with a
new NAV prompt. Keeps all offset estimates
(Wind/current etc.) in the algorithms
(recommended).
To Next Page
Loading...
Need help?
General
