Simrad AP26 and AP27 Autopilots
40 20222147A
2.
Selects NAV mode at present position with a
new NAV prompt. May result in a less accurate
return to the track.
3.
Selects AUTO mode with the current heading as
the set course.
2.16 Selecting a different Navigation source
If you have more than one navigation source connected to the
autopilot, you will be able to choose any for navigation. Refer to
the ‘Source Select’ item in the User Set-up menu for details on
selecting a different navigator (page 43).
2.17 Multiple station system
In normal operation control is accessible from every
control unit connected to the autopilot system. One
control unit is "active" and provides the user with
access to all functions. All remaining control units
are "inactive" and have no effect on mode changes or
course selection. A single press on any of the mode
buttons on an "inactive" control unit will allow
transfer of command and make it "active".
2.18 Lock function
The "LOCK" function is a safety feature in the autopilot system.
It will disable all control units, including the FU25 Follow-up
lever, except for a single user selected control unit location.
When the "lock" function is in use, no transfer of command can
take place; only the active control unit stays in command.
To enable the "lock" function, make a quick double press on the
STBY button.
To Next Page
Loading...
Need help?
General
