Operation
20222147A 33
2. Non Follow Up steering
by pressing:
or
or using NFU
steering lever
3. Follow Up steering by
pressing both:
and using the
course knob
To return from Dodge mode, press one of the following:
Selects AUTO
mode and
returns to the
last set course
or
Selects AUTO
mode with the
current heading as
the set course
Note ! Using NFU or FU modes while dodging will make “NFU” or
“FU” flash instead of “DODGE”.
2.12 Thruster Steering (optional)
If the boat is equipped with an appropriate thruster (page 12), it
can be connected to the autopilot system and the boat can then
be controlled by rudder and thruster.
When the autopilot is controlling the thruster you may:
• Have excellent course and track keeping performance at
very low speeds (AUTO, NoDrift or NAV modes).
• Have automatic heading control when stationary, e.g.
keep the bow into the wind and/or the waves.
• Provided the warf has no steel construction you can use
AUTO mode to keep the bow steady when docking.
A thruster icon below the mode index confirms that a thruster is
connected to the system (via TI25 Thruster Interface).
From the User Set-up Menu (page 41) you can switch the
thruster on and off. When the thruster is switched on, both
rudder and thruster is used to m
aintain the heading. If the boat
speed exceeds 6 knots the thruster is automatically disabled.
To Next Page
Loading...
Need help?
General
