Simrad AP26 User Manual

Simrad AP26 and AP27 Autopilots
84 20222147A
NAV change limit
In NAV mode, when the
required course change at the
approaching waypoint is
bigger than the set limit, you
are prompt to verify that the
upcoming course change is
acceptable. The limit can be
set to 10°, 20° or 30°.
Default: 10°
4.7 Parameters
To access the Parameters,
rotate the course knob
clockwise.
A boats steering parameters
found by the Automatic
tuning can be looked at and if
needed changed under this
menu item. The steering
parameters can also be set
manually instead of
performing an Automatic
tuning. The parameters are
divided into two sets:
• HI value parameters for automatic steering at low speed
• LO value parameters for automatic steering at high speed
Step through the menu items by pressing the STBD or PORT
buttons. Adjust the value by rotating the course knob.

Simrad AP26 Specifications

General

Brand	Simrad
Model	AP26
Category	Autopilot System
Language	English