Configuration and Setup
20222147A 75
Language selection
To access the language selection in the Installation Menu,
confirm “Yes” by turning the course knob clockwise
The autopilot can present the display text in eight different
languages:
English, Deutsch, Francais, Espanol, Italiano, Nederlands,
Svenska and Norsk.
Turn the course knob to select the language you
wish to use.
Continue to next item in the menu by pressing
the STBD button, or leave the menu by pressing
the STBY button.
4.4 Interface Settings
Sets the format of the clock/data output for radars connected to
the Autopilot Computer.
Step to the Interface part of the
Installation Menu.
Turn the course knob clockwise
to access the Interface Setup
items.
Use the course knob to select the
connected type of radar.
4.5 Display units
Select Display units by pressing
STBD button and confirm by
rotating the course knob clock-
wise. This screen gives access to
the display unit set-up of the Wind
Speed, Sea temperature and
Depth. The setup is local to each
control unit.
To Next Page
Loading...
Need help?
General
