Simrad AP26 User Manual

Installation
20222147A 57
Cable strain relief
Once all the cables have been run to the appropriate peripherals
and connected to the autopilot computer unit they should be
secured to ensure that they are not snagged or exposed to excess
strain.
Screw the strain relief tab to the cable exit port on the autopilot
computer unit using the screws supplied and secure the cables to
the tab using the wraps as shown.
Figure 3-3 Cable strain relief

Simrad AP26 Specifications

General

Brand	Simrad
Model	AP26
Category	Autopilot System
Language	English