Installation
20222147A 69
Figure 3-16 Robnet2, SimNet and Roblink network
Notes !
1. Maximum total length of SimNet cable is 60 m (196 ft.)
excluding the 30 m (99 ft.) of masthead cable.
2. It is not necessary to connect all autopilot control units to
SimNet for data sharing. However, if you want to have full
redundancy and SimNet control, e.g. select sources, you
have to connect the actual unit to SimNet.
3. AT15 is a NMEA0183/SimNet converter for the IS15
Instrument system. IS15 makes no load on SimNet.
4. AT44 is a SimNet interface that is supplied with CX44 and
CX54.
To Next Page
Loading...
