To Next Page

To Previous Page

#URSORFUNCTION

With chart display active,PRESSTHECURSORKEYTOACTI

VATETHECURSORand PRESS [CLR]TOTURNTHECURSOROFF

(or turn cursor ON/OFF via [MENU], [1], [4])

5SETHECURSORKEYTOMOVECURSORINANYDIRECTIONON

THESCREEN - the chart will automatically adjust. If the

chart cursor has not been moved for a full 5 minutes,

the cursor will turn off and the ship’s position will be

centered on the screen. The preset 5 min. time-out is

adjustable in Chart setup 2.

In data displays the cursor will be shown in form of a

line under the active field or as a ruling box around.

:OOMFUNCTION- with CURSORON, the zoom function

will zoom around the cursor. With CURSOROFF, the zoom

function will zoom around the ship’s position.

:OOMINFORDETAILSSMALLERSCALE / :OOMOUTFOROVER

VIEWGREATERSCALE

F Use one of the shorcut keys to quickly change the

chart scale:

Press [1] 1:6.600.000 Press [6] 1:20.000

Press [2] 1:2.000.000 Press [7] 1:6.000

Press [3] 1:600.000 Press [8] 1:2.000

Press [4] 1:200.000 Press [9] 1:600

Press [5] 1:60.000

Chart details may not be available in all scales in all

areas. If "Missing chart in desired scale" appears on the

screen, try instead the ordinary [ZOOM] keys.

The BUILTINWORLDCHART can be zoomed up/down in

seven steps from a scale of approx. 1:33,000,000 to

1:1,100,000. An OVERZOOMFUNCTION enables you to

ZOOM

OUT

CLR

#HAPTER #%-+))#HARTANDPOSITIONMENUS

Simrad ce32 mkii User Manual

Questions and Answers: