• Autopilot controller, showing active mode, heading, rudder
and various steering information depending on active autopilot
mode. Manual adjustments to the set heading can only be
made when the port and starboard arrow indicators are
illuminated red and green.
• Mode selection, includes access to turn pattern selection.
• Turn pattern selection
Autopilot controller Mode selection Turn pattern selection
Autopilot tile in Instrument bar
You can select to show the autopilot tile in the Instrument bar.
If the autopilot pop-up is turned off you can turn it on by selecting
the tile in the Instrument bar.
The Autopilot panel
The autopilot panel is used to display navigation data. It can be
shown as a full screen panel, or in a multi-panel page.
The number of data fields included in the autopilot panel is
dependent on available panel size.
Autopilot | GO7 Operator Manual
59
To Next Page
Loading...
