42 | Wiring the NSE
Connecting BSM-2 Broadband Echosounder
Key Description
ANSE display
B BSM-2 Broadband Echosounder module
C Ethernet cable yellow 5 pin (see “Ethernet cables (yellow)” on page 78)
for more cable length options. Cable can be connected directly to NSE or via
a Network Expansion Port. (see “Ethernet” on page 33)
D 12 or 24 V DC
E Speed paddle wheel transducer
F Sonar transducer
Note: transducers are hard-wired in to the BSM-2 module; see Simrad
BSM-2 Broadband Sounder Module manual for further details
+
_
A
C
D
B
F
E
To Next Page
Loading...
