Commission the system | 49
Radar setup
Basic set up is required on all new radar installations. The set up varies slightly between
Broadband radar and the range of conventional HD pulse radars. The NSE will detect the
type of radar and display relevant information.
If two radar exist on the network, both radar will require individual setup. When the first
radar setup is completed choose the second radar from SOURCES in the Radar Options
menu, then complete second radar setup.
Broadband Radar™ HD Pulse Radar
To commission a 3G
or BR24 Radar:
• set bearing
alignment
• set antenna
height
• local interference
rejection (if
needed)
To commission a
pulse radar;
• set bearing
alignment
• set antenna
height.
• set range
offset
• Park angle for
open array
scanners
HD Pulse Radars: Leave in standby for 30 min before transmitting. (First time only) to
burn in the magnetron.
Radar software version
Radar type and software version are displayed under radar installation. To upgrade radar
software refer to Software Upgrades on page 71.
Radar Transmit,
Standby or off
Press Radar func-
tion button to dis-
play the radar
MENU
9
WIN
Press Menu to bring
up radar options
To make radar ad-
justments.
• select item to
adjust
PLOT
MARK
GOTO
VESSEL
Adjust the setting
value as needed
Setting value is dis-
played on screen
MENU
9
WIN
To confi rm
To Next Page
Loading...
