Simrad NSE12 Installation Manual

54 | Commission the system
Damping
Controls how quickly instruments respond to changes in values from sensors.
Damping can be used for heading, wind, boat speed and depth instruments.
Increasing the damping applies more averaging or smoothing of the data update rate
on the instrument or display. Damping settings are applied to SimNet displays and
Instruments belonging to particular damping SimNet Groups.
Device List
Using the Device List Function you can:
• list all of the active SimNet and NMEA2000 devices on the network, showing model
description and serial number. Devices can be sorted by model ID or by serial number
• display information relating to a device such as, name, manufacturer, software
version, instance, status
• give the device a logical name relevant to the user
• see data coming from the device
Some devices can be confi gured
further
Device data can be viewed
Enter a logical
name for the
device such as
a location to
differentiate
same devices
e.g. GS15 Port

Simrad NSE12 Specifications

General

Brand	Simrad
Model	NSE12
Category	Monitor
Language	English