- 14 -
951-180-083-EN
Version 01
EN
1. Safety instructions
1.13.3 Qualied electrician
A person with appropriate technical training,
knowledge, and experience who can recog-
nize and avoid hazards that may result from
electricity
1.13.4 Specialist in maintenance and
servicing in potentially explosive
atmospheres
This is a person competent due to qualified
technical education, training, and experi-
ence to recognize risks and possible hazards
when working on the device or subcompo-
nents in potentially explosive atmospheres
and to rectify these by taking suitable ac-
tions. The specialist has knowledge of the
various types of protection, installation
procedures, and explosive atmosphere clas-
sifications. The specialist is familiar with
the rules and requirements relevant to his
or her activity and explosion protection,
especially ATEX Directives 2014/34/EU and
1999/92/EC.
1.14 Instruction of outside tters
Before commencing work, the operator
must inform outside fitters of the safety
regulations,
applicable accident prevention regulations,
and the functions of the centralized lubrica-
tion system and protective devices.
1.15 Provision of personal protective gear
The operator must provide personal protec-
tive gear appropriate for the location and
intended application. This also includes ESD
clothing and ESD tools for work in a poten-
tially explosive atmosphere.
1.16 Operation
The following must be observed during first
start-up and operation:
○ All information within this manual and
all information within the referenced
documents
○ All laws and regulations that
the operator must observe
1.17 Emergency shutdown
Shut down the product in an emergency by:
○ Switching off the main machine in which
the product is integrated
○ If necessary, pressing the on/off switch on
the main machine
To Next Page
Loading...
Need help?
General
