- 22 -
951-180-083-EN
Version 01
EN
1. Safety instructions
1.26 Residual risks
Residual risk
Possible in
lifecycle
Avoidance / Remedy
Personal injury / property damage due to
falling of hoisted parts
A, B, C, G, H, K
Unauthorized persons must be kept away; nobody is allowed to be present below hoisted
parts. Lift parts using suitable and tested lifting gear.
Personal injury/property damage due
to tilting or falling product due to non-
compliance with specified torques
B, C, G
Adhere to the specified torques. Secure the product only to components with a sufficient load-
carrying capacity. If no torques are specified, use those specified for the screw size for screws
of strength class 8.8.
Personal injury / property damage due to
electric shock resulting from power lead
damage
B, C, D, E, F, G, H
Inspect power leads for damage prior to initial use and then at regular intervals. Do not install
the cable on moving parts or wearing spots. If this cannot be avoided, use anti-kink coils and/
or conduits.
Personal injury / property damage due to
spilled, leaked lubricant
B, C, D, F, G, H, K
Be careful when filling the reservoir and then connecting or disconnecting the lubricant lines.
Use only hydraulic screw unions and lubrication lines suitable for the specified pressure. Do
not install lubrication lines on moving parts or wearing spots. If this cannot be avoided, use
flexible hose lines or anti-kink coils and/or conduits.
Lifecycles: A = Transport, B = Assembly, C = First start-up, D = Operation, E = Cleaning, F = Maintenance, G = Malfunction, repair,
H = Shutdown, K = Disposal
To Next Page
Loading...
Need help?
General
