10
EN
10. Maintenance
9
- 89 -
951-180-083-EN
Version 01
10. Maintenance
Careful and regular maintenance is required in order to detect and remedy possible malfunctions in time.
The specific intervals must always be determined by the operator according to the operating conditions and regularly reviewed and adapted
where necessary. If necessary, copy the table for regular maintenance activities.
Maintenance checklist
Activity to be performed YES NO
Electrical connection of the inductive NAMUR sensor / directional solenoid valve established correctly
Mechanical connection established correctly
The performance characteristics for the aforementioned connections match the specifications in “Technical data”
All components such as lubrication lines and metering device are correctly mounted.
No apparent damage, contamination, or corrosion
Any dismantled protective and monitoring equipment is fully reinstalled and functional
No unusual noises, vibrations, moisture accumulation, odors present
No undesired discharge of lubricant at connections
Lubricant is fed without bubbles
The bearings and friction points requiring lubrication receive the planned lubricant volume
Protective earthing system fully present, properly connected, and electrically continuous
No accumulated dust present
To Next Page
Loading...
Need help?
General
