13
EN
13. Shutdown, disposal
12
- 95 -
951-180-083-EN
Version 01
13. Shutdown, disposal
13.1 Temporary shutdown
Temporary shutdown is performed by:
○ Switching off the main machine
○ Disconnecting the hydraulic supply
connections
○ Disconnecting the power supply (induc-
tive NAMUR sensor) on the product or
the valve
13.2 Permanent shutdown, disassembly
Permanent shutdown and disassembly of
the product must be planned properly by the
operator and conducted in compliance with
all applicable requirements.
13.3 Disposal
Countries within the European Union
Waste should be avoided or minimized to
the extent possible. The disposal of prod-
ucts contaminated with lubricant must be
performed by a recognized waste disposal
company in compliance with environmental
protection requirements and waste disposal
regulations as well as the requirements of
local authorities.
The producer of waste is respon-
sible for its specific classification,
as the European Waste Catalog
provides for different disposal
keys for waste that is the same
but of different origin.
Dispose of or recycle electrical
components in accordance with
WEEE Directive 2012/19/EU.
Plastic or metallic parts can be
disposed of as industrial waste.
Countries outside the European Union
Disposal is carried out according to the ap-
plicable laws and regulations of the country.
To Next Page
Loading...
Need help?
General
