mmo2006-003-026_a
FAN COOLED — SPARE DRIVE BELT INSTALLE D IN HOLDER
1. Push drive belt on LH side
2. Make sure there is no contact with air duct
40) Hitch
The hitch can be used to pull most equipment. Use a r igid tow bar.
41) Shie ld s and Guard s
WARNING
Never ope rate e ngine with out belt guard s e curely i ns talled or,
with hoo d or access/side panels open or removed.
Your snowmobile is provided with a number of shields a nd guards.
Leave these in place on your vehicle as they are designed to keep
clothing and hands out of moving parts and away from hot compo-
nents. Never at tempt to make adjustm ents to any movi ng part while
the engine is running.
_________________________
127
To Next Page
Loading...
Need help?
General
