Drive Chain Tension
Remove hai r pin.
Fully tighten tensioner adjustment screw by hand, then back off only
far enough for hair pin to engage in locking hole.
2
1
A33D0BA
TYPICAL
1. Hair pin
2. Adjustment screw
Drive Belt Condition
Inspect belt for cracks, fraying or abnormal w ear (uneven wear, wear
on one side, missing cogs, cracked fabric). If abnormal wear is not-
ed, probable cause could be pulley m isalignment, excessive RPM
w ith fro z en trac k, fast starts without warm-u p period , burred or rusty
sheave, oil on belt or distorted spare belt. Contact an authorized
SKI-DOO dealer.
_________________________
199
To Next Page
Loading...
Need help?
General
