Ski-Doo REV series 2007 User Manual

1
A02D1UA
TYPICAL
1. Flush
Fan Cooled Models
Adjust dr ive belt height using A llen screws, as shown.
– To lower belt in driven pulley: turn Allen screws clockwise.
– To raise belt in driven pulley: turn Allen screws counterclockwise.
N O TE: Turn All en sc rews 1/4 turn at a tim e, then rotate drive n pul-
ley to allow drive belt to settle in pulley. C heck height, repeat as
re quire d.
204
_________________________

Ski-Doo REV series 2007 Specifications

General

Brand	Ski-Doo
Model	REV series 2007
Category	Snowmobiles
Language	English