SMA CLUSTER CONTROLLER User Manual

Events and Device Status
Problem Cause and corrective measure
In the event log, the wrench symbol
( ) is displayed next to the event
type.
This event can only be rectified by a user with "Installer"
rights.
Corrective measures:
• Contact the user with "Installer" rights and inform them of
the serial number of the device and the event number.
In the event log, the telephone re-
ceiver symbol ( ) is displayed
next to the event type.
This event can only be rectified by SMAService.
Corrective measures:
• Contact the user with "Installer" rights and inform them of
the serial number of the device and the event number.
The user with "Installer" rights contacts the Service (see
Section20, page111).
At least one device has the status
Warning or Error.
There may be a disturbance in the device.
Corrective measures:
• Check the Cluster Controller event log (see Section9.1,
page51).
• Refer to the device documentation.
18 Troubleshooting
SMA Solar Technology AG
User Manual 101ClusterController-BA-en-15

SMA CLUSTER CONTROLLER Specifications

General

Data Logging	Yes
Display	LCD
Power Supply	24 V DC
Remote Monitoring	Yes
Protection Class	IP20
Communication Interfaces	Ethernet
Product Type	Controller
Manufacturer	SMA