SMA SUNNY WEBBOX User Manual

SMA Solar Technology AG Commissioning
User Manual SWebBox-BEN111033 23
☑The "Local Area Connection Properties" window
appears.
6. Select "Internet Protocol Version 4 (TCP/IPv4)" and
then click [Properties].
☑The "Internet Protocol Version 4 (TCP/IPv4)
Properties" window opens.
7. Note the current network settings in the "Internet
Protocol Version 4 (TCP/IPv4) Properties" window.
This enables you to reset the computer network
settings after configuration of the Sunny WebBox.
8. Enter the following static network settings for the
computer in the "Internet Protocol Version 4
(TCP/IPv4) Properties" window.
– Activate the field "Use the following IP address".
– Enter 192.168.0.100 in the "IP address:" field.
– Enter 255.255.255.0 in the "Subnet mask:"
field.
– Delete any entries in the "Default gateway",
"Preferred DNS server", and "Alternate DNS
server" boxes.
9. Select [OK].
10. In the "Local Area Connection Properties" window,
select [OK].
☑ The computer is set to the network settings of the Sunny WebBox.

SMA SUNNY WEBBOX Specifications

General

Brand	SMA
Model	SUNNY WEBBOX
Category	Measuring Instruments
Language	English