Chapter 1 Welcome
docs.smarttech.com/kb/171745 12
l
Stands
l
USB extenders
See also smarttech.com/accessories
SMART OPS PC module
SMART Open Pluggable Specification (OPS) PC modules provide a hassle-
free Windows Pro installation based on Intel
®
Core
™
processors and are
designed specifically to work with a SMART Board interactive display. All OPS
PC modules are fully licensed with Windows Pro. Install the OPS PC module in
a display’s accessory slot to provide a complete 4K UHD Windows installation
at your fingertips, without the need for an external PC or additional cables.
Install familiar Windows applications, such as SMART Notebook
®
, SMART
TeamWorks
™
, and SMART MeetingPro
®
software, and access the internet
directly through your display’s network connection. Upgrades and service for the OPS PC module are
easy to perform without removing the display from its mounting.
Stands
If you want to move the display from place to place, you can install it on a SMART mobile stand. If you
are installing the display on a wall that cannot support the display’s full weight, you can install the display
on a SMART floor stand.
USB extenders
As noted in the display’s specifications, the USB connection between the display and computer should be
no longer than 16'(5m). If you need to connect a computer that is more than 16' (5 m) from the display,
use the following USB extender:
Extender Specifications
USB-XT docs.smarttech.com/kb/
119318
See also Extending USB cables
More information
SMART provides a variety of other documents for this display in the Support section of the SMART
website (smarttech.com/support). Scan the QR code on this guide’s cover for links to SMART Board GX
series interactive display documents and other support resources.
To Next Page
Loading...
Need help?
General
