SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016 93
2. To create a new interface group, enter a unique Group Name, then proceed with either step 3 (dynamic) or step 4 (static)
below.
3. If this new grouped interface is to share the WAN interface, click Shared WAN Interface. Not selecting this option this will
cause the WAN interface you select to be removed from any other interface groups.
Important: If a vendor ID is configured for a specific client device, make sure to reboot the client device attached to the gate-
way to allow it to obtain an appropriate IP address.
To Next Page
Loading...
Need help?
General