SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016 114
Field Name Description
Current Network
Key
(Appears when WEP Encryption is set to Enabled) Select which of the four keys is presently
in effect.
Network Key 1-4 (Appear when WEP Encryption is set to Enabled) Enter up to four encryption keys using the
on-screen instructions to achieve the desired security strength.
WPA2 and Mixed WPA2/WPA Network Authentication
The following fields appear when you select WPA2 or Mixed WPA2/WPA in the Network Authentication field.
Modify the fields as needed and then click Apply/Save.
The fields on this page are explained in the following table.
Field Name Description
Protected Management
Frames
Select whether management frames are protected. Options are
Disabled
,
Capable
, and
Required
. The default is
Disabled
.
WPA2 Preauthentication Select whether clients can pre-authenticate with the gateway while still connected to
another AP. Options are Enabled and Disabled. The default is Disabled.
To Next Page
Loading...
Need help?
General