SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016 55
IPv6 Autoconfig
On this page, you can configure your gateway's IPv6 environment.
1. In the left navigation bar, click Advanced Setup > LAN > IPv6 Autoconfig . The following page appears.
2. Modify the fields as needed, using the information in the table below.
3. Click Save/Apply to commit your changes.
The fields on this page are explained in the following table.
Field Name Description
Interface Address IPV6 address to assign as the gateways Local LAN IPV6 address and prefix length. Prefix length is required.
IPv6 LAN Applications
section
Enable DHCP v6
Server
Enable the DHCP v6 feature on the LAN.
Enable DHCP Server - This option is selected by default. Click to stop inheriting IPV6 address assignments from the WAN IPV6 inter-
To Next Page
Loading...
Need help?
General