SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016 112
Modify the fields as needed and then click Apply/Save.
The fields on this page are explained in the following table.
Field Name Description
WEP Encryption Select to enable Wired Equivalent Privacy (WEP) mode. Options are Enabled and Disabled.
The default is Disabled for Open authentication and Enabled for Shared authentication.
Encryption Strength (Appears when WEP Encryption is set to Enabled) Select the length of the encryption
method. Options are 128-bit and 64-bit. 128-bit is the default and is the more robust option
for security.
Current Network
Key
(Appears when WEP Encryption is set to Enabled) Select which of the four keys is presently
in effect.
Network Key 1-4 (Appear when WEP Encryption is set to Enabled) Enter up to four encryption keys using the
on-screen instructions to achieve the desired security strength.
802.1X Network Authentication
The following fields appear when you select 802.1X in the Network Authentication field. WPS is disabled for this method.
To Next Page
Loading...
Need help?
General