SMART Board GX - Page 76

Appendix A Adjusting display settings
smarttech.com/kb/171744 76
Option Values Function Notes
Add network SSID
Security
Password
Manually connect to a hidden
wireless network.
For the network you’re connecting to:
l
Add the SSID
l
Select a security protocol
l
Enter the password
Ethernet
Connect Enable
Disable
Enables or disables connecting to a
network.
[N/A]
IP settings [N/A] Enables configuration of the
display’s IP settings.
Displays the IP address DHCP
(automatic) or manual (static).
DHCP Enable
Disable
Enables the display to obtain an
IPaddress automatically
[N/A]
Static Enable
Disable
Enables the display to be assigned a
static IPaddress
Use the display’s pop-up keyboard
to type the IP address, Gateway
address, Network prefix length, and
DNS server address.
MAC address [N/A] Shows information about the
network the display is connected to.
[N/A]
IP address [N/A] Displays the unique address of the
Ethernet adapter.
[N/A]
Proxy Settings None
Manual
[N/A] When Proxy Settings is set to
Manual , additional settings appear
for entering the Host name of the
proxy server, Port of proxy server ,
and Do not apply proxy to the
following websites: .
Hotspot
Hotspot switch Enable
Disable
Enables or disables the display’s
Wi-Fi hotspot.
The display must be connected to an
Ethernet network to provide a Wi-Fi
hotspot.
Note
The display’s Wi-Fi connection will
be disabled when providing a
Wi-Fi hotspot.
Hotspot name [N/A] Sets the hotspot name. Keep the default hotspot name or
use the display’s on-screen
keyboard to type a new one.
Security None
WPA2 PSK
Set an encryption method for the
display’s Wi-Fi hotspot.
WPA2-PSK is the prefered security
option.
Password [N/A] Set a password for the display’s
Wi-Fi hotspot.
Use the display’s pop-up keyboard
to type a password.
Show password [N/A] [N/A] Select to view password.